PF-2 Fluoride and Arsenic Reduction Filters
The PF-2 reduction elements screw onto the bottom of the Black Berkey water purification elements and work in conjunction to adsorb the following unwanted elements found in drinking water.
• Arsenic V and pre-oxidized Arsenic III
• Other residual heavy metal ions
FLUORIDE: Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm (11 lpm) per cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (>95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (>99.75% reduction).
ARSENIC: This product uniquely targets the entire family of arsenic oxide anions as well as the arsenic cations.
REPLACEMENT: Under normal circumstances, a set of 2 fluoride filters should be replaced every 1000 gallons. Please use our filter calculator to determine how long your PF-2 filters will last in your system before needing replacement.